Using software based on the Monte-Carlo method for receiving the few-group homogenized macroscopic interaction cross-section
Galchenko V. V. Abdulaev А. М. Shlapak І. І., Galchenko V. V. Abdulaev А. М. Shlapak І. І., Galchenko V. V. Abdulaev А. М. Shlapak І. І.
Trudy Odesskogo Politehničeskogo Universiteta · 2017
doi:10.15276/opu.3.53.2017.05 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The constant preparation issues are important for performing the few-group analysis for different states of the reactor core. Besides, the constant preparation method influences the further calculations accuracy and quality. The transport software products (deterministic codes) are usually used for the few-group characteristics preparation. On the basis of the neutron transport theory these codes calculate neutron fluxes depending on the energy and on the location in the cell. In present paper the description of fuel assembly calculation scheme for preparing the few-group characteristics is given for the Serpent code. This code uses the Monte-Carlo method and energy continuous microscopic data library. Serpent code was developed for calculating the fuel assembly characteristics including burnup calculations and preparation of the few-group homogenized macroscopic interaction cross-sections for the core calculating. The calculation scheme for the Serpent code for FAA and the results of the basic neutron-physical characteristics comparative calculations with PHOENIX-H and WIMSD5B codes are presented.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.