Skip to content
naulon
Not checkedNot checked for notices yet.

Calculation Method for Flow Boiling and Flow Condensation of R134a and R1234yf in Conventional and Small Diameter Channels

Mikielewicz Dariusz, Jakubowska Blanka

Polish Maritime Research · 2017

doi:10.1515/pomr-2017-0032 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The paper presents the results of calculations performed using the authors′ model to predict the heat transfer coefficient during flow boiling for two refrigerants R134a and R1234yf. The experimental data from various past studies have been collected and the calculations have been conducted for the full range of quality variation and a wide range of mass velocity. The aim of the study was to test the sensitivity of the in-house flow boiling and flow condensation model. The importance of taking into account the surface tension as the parameter exhibiting its importance in case of the flow in minichannels, as well as the influence of the reduced pressure were analysed. The obtained numerical results show good consistency with those recorded in the experiments.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.