Skip to content
naulon
Not checkedNot checked for notices yet.

Controllable morphology of Bi2S3 nanostructures formed via hydrothermal vulcanization of Bi2O3 thin-film layer and their photoelectrocatalytic performances

Liang Yuan-Chang, Li Tsun-Hsuan

Nanotechnology Reviews · 2021

doi:10.1515/ntrev-2022-0016 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Bi 2 S 3 nanostructures with various morphologies were synthesized through hydrothermal vulcanization at different sulfur precursor (thiourea) concentrations. A 100 nm thick sputter-deposited Bi 2 O 3 thin-film layer on a fluorine-doped tin oxide glass substrate was used as a sacrificial template layer. The etching of the Bi 2 O 3 sacrificial template layer and the regrowth of Bi 2 S 3 crystallites during hydrothermal vulcanization produced the different Bi 2 S 3 nanostructure morphologies. The lowest sulfur precursor concentration (0.01 M) induced the formation of Bi 2 S 3 nanosheets, whereas the Bi 2 S 3 nanoribbons and nanowires were formed with increased sulfur precursor concentrations of 0.03 and 0.1 M, respectively. These results indicate that sputter-deposited Bi 2 O 3 thin-film layers can be effectively used to form low-dimensional Bi 2 S 3 crystals with controllable morphologies. Among the various Bi 2 S 3 samples, the Bi 2 S 3 nanosheets exhibited superior photoactive ability. The higher active surface area, surface defect density, light absorption capacity, and photo-induced charge separation ability of Bi 2 S 3 nanosheets explain their superior photoelectrocatalytic degradation ability of rhodamine B dyes.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.