Skip to content
naulon
Not checkedNot checked for notices yet.

Laboratory Investigations Applied to Wood Dust Emmited by Electrical Hand-Held Belt Sander

Dado Miroslav, Mikušová Lucia, Hnilica Richard

Management Systems in Production Engineering · 2018

doi:10.1515/mspe-2018-0021 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Aim of this paper was to investigate the effects of grit size and wood species on mass concentration and size distribution of wood dust produced by hand-held belt sander. Experimental study was designed as 2x2 full factorial experiments. Experimental parameters and their levels were abrasive grain size (P80, P120) and wood species (European beech (Fagus sylvatica L.), Norway spruce (Picea abies)).The mass concentration of emitted wood dust was measured using aerosol monitor (TSI Inc., DustTrak DRX 8533). Sampler head was sited in place representing breathing zone of operator of sander. The results was analysed employing the analysis of variance (ANOVA) with 5% of significance level. Real-time measurements demonstrated that spruce wood generated higher dust concentrations than beech wood due to difference in abrasion durability. Compared to sanding belt with P80 grit size, approximately 16%-32% higher dust concentration was generated when the sanding belt with P120 grit size was used.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.