Skip to content
naulon

Not checkedNot checked for notices yet.

The effect of dosage nanosilica and the particle size of porcelanite aggregate concrete on mechanical and microstructure properties

Ahmed Sahar I., Al-Adili Aqeel Sh., Hameed Awham M.

Journal of the Mechanical Behavior of Materials · 2022

doi:10.1515/jmbm-2022-0062 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Several research studies have been conducted on the usage of nanoscale silica particles in concrete, based on the success of employing silica fume as an active pozzolan in concrete. The impact of several doses of nanosilicas (NpSs) in powder having a certain surface area of 160 m2/g and two particle sizes of porcelanite rock on the mechanical characteristics of lightweight porcelanite aggregate concrete was investigated. The addition of NpS particles significantly improved the workability of mixes, according to the results. The compressive strength of samples was influenced by NpS, with higher doses of NpS resulting in greater improvement. Porcelanite aggregate concrete’s compressive strength was unaffected by a modest percentage of different NpSs. NpS had an effect on the samples. Flexural strength also improved at all NpS dosages. The flexural strength of porcelanite aggregate concrete increased by a low percentage of various NpS.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.