Skip to content
naulon

Not checkedNot checked for notices yet.

Control of surface defects on plasma-MIG hybrid welds in cryogenic aluminum alloys

Hee-Keun Lee, Kwang-San Chun, Sang-Hyeon Park and 1 more

International Journal of Naval Architecture and Ocean Engineering · 2015

doi:10.1515/ijnaoe-2015-0054 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Lately, high production rate welding processes for Al alloys, which are used as LNG FPSO cargo containment system material, have been developed to overcome the limit of installation and high rework rates. In particular, plasma-metal inert gas (MIG) hybrid (PMH) welding can be used to obtain a higher deposition rate and lower porosity, while facilitating a cleaning effect by preheating and post heating the wire and the base metal. However, an asymmetric undercut and a black-colored deposit are created on the surface of PMH weld in Al alloys. For controlling the surface defect formation, the wire feeding speed and nozzle diameter in the PMH weld was investigated through arc phenomena with high-speed imaging and metallurgical analysis.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.