Pre-reduction of carbon-containing pellets of high chromium vanadium–titanium magnetite at different temperatures
Zhu Kui-song, Cheng Xiang-kui, Lin Yin-he and 5 more
High Temperature Materials and Processes · 2022
doi:10.1515/htmp-2022-0006 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The effect of temperature on phase transformation, metallization rate, carbon residue and agglomeration of metal Fe after the pre-reduction of carbon-containing pellets in high-chromium vanadium–titanium magnetite (HCVTM) was investigated. The results indicated that titanomagnetite was finally reduced to metal Fe and (Mg, Fe)Ti2O5 without low valence titanium oxide with increasing pre-reduction temperature from 950 to 1,250℃; Vanadium magnetite produces Fe, VO and VC0.88 without V, and chromite magnetite produces Fe, Cr2O3, CrCx and a small amount of Cr. With an increase in the pre-reduction temperature, the metallization rate in the metallized pellets gradually increases, while the content of the residual carbon gradually decreases. Meanwhile, the iron particles precipitated on the surface of ore particles begin to soften into strips and finally agglomerate to form spherical iron particles, which leads to the diameter of iron particles increasing from 8.23 to 182.35 μm. When the pre-reduction temperature is 1,250℃, the maximum metallization rate in the metallized pellets is 92.49 wt% and the minimum content of residual carbon is 10.37 wt%.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.