Skip to content
naulon
Not checkedNot checked for notices yet.

Study on microstructure and mechanical properties of P92 steel after high-temperature long-term aging at 650°C

Duan Peng, Liu Zongde, Li Bin and 2 more

High Temperature Materials and Processes · 2020

doi:10.1515/htmp-2020-0087 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

A series of long-term high-temperature aging tests of ASME A335-P92 steel from 1,000 to 29,000 h at 650°C were carried out. The microstructure evolution of as-received and aging specimens at different stages was investigated using optical microscope observations, scanning electron microscope examinations, and TEM investigations. The static mechanical strength properties (yield strength/ultimate tensile strength) at room and 600°C test temperatures and the plastic performance (elongation/reduction in area) were also analyzed. The experimental results show that the Laves phase can be precipitated rapidly in the early aging period. After a certain aging period, the continuous precipitation of M23C6 and the relatively high coarsening rate of Laves resulted in a rapid decrease of room and high-temperature mechanical properties in the early aging period. However afterwards for the long aging time, a slow decline in tendency of mechanical properties was presented.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.