Solidification pathways and phase equilibria in the Mo–Ti–C ternary system
Ida Shuntaro, Sekido Nobuaki, Yoshimi Kyosuke
High Temperature Materials and Processes · 2020
doi:10.1515/htmp-2020-0053 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The liquidus surface projection and isothermal section at 1,800°C in the Mo–Ti–C ternary system are examined using arc-melted alloys. A ternary transition peritectic reaction (L + Mo2C → Mo + TiC) takes place during solidification, which is apparently different from the ternary eutectic reaction (L → Mo + TiC + Mo2C) observed in a previous report. Since the composition of the eutectic reaction (L → Mo + TiC) shifts toward the Mo–Ti binary line with increasing Ti concentration, the volume fraction of the Mo phase and the interlamellar spacing of the Mo and TiC phases increase in the eutectic microstructure. At 1,800°C, the TiC phase in equilibrium with the Mo phase can contain more than 28 at% Mo and a Mo/TiC/Mo2C three-phase region exists at around Mo–15Ti–10C.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.