Electrochemical Impedance Spectra for the Corrosion of Porous Cu-35mass%Ni-(5,10)mass%Cr Alloys in Molten (0.62Li,0.38K)2CO3 at 650 °C in Air
Chen Jian, Huang Zihan, Ren Yanjie and 4 more
High Temperature Materials and Processes · 2013
doi:10.1515/htmp-2013-0006 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The electrochemical impedance spectra was employed to investigate corrosion behavior of porous Cu-35mass%Ni-5mass%Cr and Cu-35mass%Ni-10mass%Cr alloys in molten (0.62Li,0.38K)2CO3 at 650 °C in air. The results show that the Nyquist plots for the corrosion of two alloys are composed of two capacitive loops which indicate that localized corrosion occur for the total immersion time. The differential potential between Cu-rich phase and Cu-depleted phase contributes to galvanic corrosion of the alloys. As compared to porous Cu-35mass%Ni-5mass%Cr, porous Cu-35mass%Ni-10mass%Cr is more corrosion resistant, which is related with its smaller area fraction of the cathodic Cu-rich phase. In addition, crevice corrosion in the pores of the alloys promotes the micro-crack generation and expansion.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.