Skip to content
naulon
Not checkedNot checked for notices yet.

The use of numerical analysis of the injection process to select the material for the injection molding

Jachowicz Tomasz, Gajdoš Ivan, Cech Vlastimil and 1 more

Open Engineering · 2021

doi:10.1515/eng-2021-0094 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The article presents the methodology of using the results of computer simulation of the injection process to assess the suitability of the material for the injection molding. Computer simulation of the basic phenomena occurring during the filling phase, packing, and cooling phase of the injection molding provides a number of different results, containing typical information both on the suggested technological parameters of the process and on the dimensional accuracy of the molded part, but also allows obtaining data on the production efficiency and energy demand of the processing machine. On the basis of this information, it is possible to assess the suitability of the polymer materials used in the simulation, intended for the production of products from a specific industry, taking into account various criteria, mainly of an economic or qualitative nature.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.