Skip to content
naulon
Not checkedNot checked for notices yet.

Design of SiO2/TiO2 that Synergistically Increases The Hydrophobicity of Methyltrimethoxysilane Coated Glass

Widati Alfa Akustia, Nuryono Nuryono, Kartini Indriana

Open Chemistry · 2019

doi:10.1515/chem-2019-0087 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

This research work presents the design of a mixture of SiO2/TiO2 that increases the surface roughness and hydrophobicity of methyltrimethoxysilane (MTMS) coated glass. The deposition of SiO2, TiO2, and MTMS were conducted using a layer by layer dip coating technique. The SiO2/TiO2 coating was derived from complete hydrolysis of tetraethylorthsilicate and titanium tetraisopropoxide. In order to evaluate and compare the performance of SiO2/TiO2/MTMS coated glass, the SiO2/SiO2/MTMS and TiO2/TiO2/MTMS were also fabricated. SiO2/TiO2/MTMS samples displayed the highest water contact angle. The topography of surfaces showed that SiO2/TiO2/MTMS exposed higher surface roughness with micro-nanoscale structures. The sequence of SiO2 and TiO2 influenced the water contact angle and the stability of the coatings. SiO2/TiO2/MTMS produced higher contact angle and stability than TiO2/SiO2/MTMS.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.