Flow profile generation for a left ventricular assist device using iterative learning control
Borchers Patrick, Walter Marian, Leonhardt Steffen and 2 more
Current Directions in Biomedical Engineering · 2021
doi:10.1515/cdbme-2021-2071 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Nowadays, rotary blood pumps for the treatment of end-stage heart failure patients are usually fixed-speed controlled. Therefore, without sufficient heart activity, patients may reveal reduced blood flow pulsatility. However, there is evidence that pulsatile flow reduces adverse events. Furthermore, optimized pump flow profiles could be used to achieve certain control objectives. Therefore, a pump flow model is identified and subsequently used to design a control system with an iterative learning controller to generate desired pump flow patterns. Either a flow sensor is required for direct measurement or the flow can be estimated from pressure sensor readings using the proposed pump flow model. For comparison, a PID controller with disturbance feedforward control is also designed. Furthermore, the robustness against respiratory sinus arrhythmia is analyzed.
Abstract licence: CC BY-NC-ND
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.