Evaluation of the Possibility of Performing Cold Backward Extrusion of Axisymmetrical Thinwalled Aluminum Die Stampings with Square Section / Ocena Możliwości Wyciskania Przeciwbieżnego Na Zimno Osiowosymetrycznych Wyprasek Z Cienką Ścianką O Przekroju Kwadratowym Z Aluminium

The paper presents evaluation of the possibility of performing cold backward extrusion of axisymmetrical thin-walled aluminum (Al 99.50, ENAW-1050A) die stampings with a square section at the strain ε=ln(A0/A1)=2 (where A0 - cross sectional area of the billet, A1 - cross sectional area of the die stamping), and the ratio h1/b=3.6 (where h1 - height of the die stamping in mm, b - width of the base of the die stamping in mm). The analysis was conducted on the basis of the results of computer modelling (FEM) and experimental investigations on backward extrusion. The boundary conditions for numerical calculations were determined experimentally with respect to the flow curve and mechanical properties of aluminum. The results of investigations into backward extrusion of thin-walled square-sectioned aluminum die stampings might be used as guidelines to develop a technological process for industrial practice.

Abstract licence: CC BY

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.