Numerical Modelling of Metal/Flux Interface in a Continuous Casting Mould / Modelowanie Numeryczne Powierzchni Międzyfazowej Metal/Ciekły Żużel W Krystalizatorze Do Ciągłego Odlewania Stali
Jowsa J., Bielnicki M., Cwudziński A.
Archives of Metallurgy and Materials · 2015
doi:10.1515/amm-2015-0464 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The behaviour of liquid slag in the mould is one of the key research areas of the continuous steel casting process. Numerical simulations of steel casting in the mould equipped with submerged entry nozzle, intended for slab casting, have been carried out within the study. For modelling the behaviour of the interfaces of the liquid steel - liquid slag - air system, the VOF method was employed. In the conducted simulations, seven different procedures for the discretization of the interface of individual phases were tested. The computation results have revealed that the “entrapment” of fine slag portions into liquid steel occurs in the system under investigation; the cause of this phenomenon is explicated by the Kelvin-Helmholtz theory.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.