Forming Of Spherical Titanium Cups From Circular Blanks With Cutouts On The Perimeter
Lacki P., Adamus J., Więckowski W. and 1 more
Archives of Metallurgy and Materials · 2015
doi:10.1515/amm-2015-0214 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Despite substantial demand for drawn parts made of high-strength sheet metal (including titanium alloys) observed in the modern industry, particularly automotive and aviation, their application remains insignificant. This results from the fact that such sheet metal shows poor plasticity and its cold-forming is almost impossible. Low drawability makes it impossible to obtain even such simple shapes as spherical cups. The authors of this study developed circular sheet-metal blanks with cutouts on their perimeter. The blanks allow for cold forming of spherical cups from Ti6Al4V titanium alloy sheet metal using conventional rigid tools. The cutouts proposed in the study affect plastic strain distribution, which in turn leads to an increase in forming depth by about 30%. The numerical analysis, performed using the PamStamp 2G System software based on finite element method, was verified experimentally.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.