Skip to content
naulon
Not checkedNot checked for notices yet.

Estimation Of Cooling Rates In Suction Casting And Copper-Mould Casting Processes

Kozieł T.

Archives of Metallurgy and Materials · 2015

doi:10.1515/amm-2015-0204 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The cooling rates associated with suction and copper-mould casting of ø2, ø3 and ø5 mm rods made in Fe-25wt%Ni and Al-33wt%Cu alloys were determined based on their cellular and lamellar spacings, respectively. The work showed that the temperature profile in cylindrical samples can not be determined merely by microstructural examination of eutectic sample alloys. A concave solidification front, as a result of eutectic transformation, caused decrease of a lamellar spacing while approaching to the rod centre. The minimum axial cooling rates, estimated based on the cellular spacing in the Fe-25wt%Ni alloy, were evaluated to be about 200 K/s for both ø2 and ø3 mm and only 30 K/s for the ø5 mm suction cast rods. The corresponding values were slightly lower for the copper-mould cast rods.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.