Vertical Motion Optimization of Series 60 Hull Forms Using Response Surface Methods
Budi Utomo, Muhammad Iqbal
Kapal · 2020
doi:10.14710/kapal.v17i3.33212 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
There are many aspects to analyze seakeeping performance, one of which is the ship's vertical motion. As well-known, vertical motion and its derivatives, vertical velocity and acceleration, will be related to other aspects of seakeeping performance, such as slamming, deck wetness, and MSI. This study discusses optimizing the hull shape with small vertical motion using the Response Surface Methods (RSM). This research aims to minimize the ship's vertical motion so that the ship's performance is better than the initial one. Besides, this research was conducted to apply the RSM in the naval architecture field. The hull's shape used in this study is Series 60 hull form with a length of 31 m. The variables used for the optimization process are the ratio of L/B (X1) and B/T (X2) in the range of ± 10% with fixed displacement. Seakeeping analysis was carried out at a speed of 6.78 knots (Fr 0.2), a heading angle of 180°, and a significant wave height of 0.77 meters. The results show that the optimum model is found in Model 9 where the value of X1 = -2.94 or L/B = 6.71 and X2 = 5 or B/T = 2.75. Model 9 can reduce the vertical motion of the ship by 16.38%.
Abstract licence: CC BY-SA
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.