Skip to content
naulon
Not checkedNot checked for notices yet.

Effect of Electrolyte Composition on Nickel Removal Process from Artificial Electroplating Wastewater Using Two-Room Electrodeposition Cells

Selly Ayu Janetasari, Djaenudin Djaenudin

Jurnal Kimia Sains dan Aplikasi · 2019

doi:10.14710/jksa.22.4.143-149 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Research of removal of soluble nickel from artificial electroplating wastewater has been investigated. The research aim to know optimum electrolit composition in nickel electrodeposition process. This study was conducted within a batch system using double chamber electrodeposition cell separated by water hyacinth leaf. Electrodeposition cell was equipped with a copper plate as cathode, graphite plate as anode, H2SO4 anolyte, NiSO4 catholyte with Na2SO4 added as supporting electrolyte. Electrodeposition performed at 5V direct current voltage for 4 hours each running and varied the concentration of H2SO4 anolyte (0,2 M; 0,6 M and 1 M), pHinitial catholyte (2; 4 and 6) and Na2SO4 (catholyte) supporting electrolyte (0 M; 0,2 M; 0,6 M and 1 M). The statistic analysis results showed that the concentration of 0.2 M H2SO4, pHinitial catholyte of 6 and 0.2 M Na2SO4 with an optimum concentration of nickel concentration values decrease of 18,433 % and nickel deposition on the cathode of 0.042 grams.

Abstract licence: CC BY-SA

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.