A mechanical behavior study of filament wound composite leaf springs
Abubakar Gambo Mohammed, Ercan Sevkat, Auwal Muhammad
Songklanakarin Journal of Science and Technology (SJST) · 2020
doi:10.14456/sjst-psu.2020.104 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The mechanical behavior of composite C- and O-shaped glass and carbon fiber epoxy leaf springs were investigated. The composite springs were manufactured via the filament winding method. The effects of design variables such as the spring thickness, fiber orientation, diameter, and clamping positions of the spring on the mechanical response were studied. Compression tests were conducted with a computer based control multi-purpose test suite machine. Test results revealed that Oshaped springs withstood a greater load compared to the C-shaped springs. Carbon fiber springs have much rigidity compared to the glass fiber springs. Increasing spring thickness positively affected the spring capacity. The springs with a smaller diameter exhibited a stiffer response compared to the others. Moreover, placing fibers close to 90º produced the highest spring load. Also, 95º clamping positions showed a better performance during the test. Finite element analysis was conducted using the Abaqus software package. Good agreement between experimental and numerical results was achieved.
Abstract licence: CC BY-NC
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.