Measurement of Pore Distribution by Utilizing Equilibrium Moisture Content Curve
Chikao Arai, Yoshiki Sano, Tadami Hanakawa
KONA Powder and Particle Journal · 2014
doi:10.14356/kona.1984011 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
As one of the methods of measuring the pore distributions, the equilibrium moisture content curve of porous powder was investigated owing to the facility in the measurement. A simple and reasonable method was developed for calculating the distribution from an adsorption isotherm. It was shown that the distribution could be evaluated by an equation which contained two coefficients. The coefficients depend only on the characteristics of adsorbate, and these values can be calculated from a t-curve. Since it seemed impossible to measure t-curve on the equilibrium moisture content, the t-curve on water vapor adsorption was determined instead of that on moisture content. It was then shown feasible to apply the curve for pore distribution analysis by the equilibrium moisture content curve.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.