Skip to content
naulon
Not checkedNot checked for notices yet.

Hardness and Texture of Electrolytic Copper Processed by ECAP at Ambient and Warm Temperature

Hiron Akira Yamada Magalhães, Talita Gama Souza, Rodrigo Felix de Araujo Cardoso and 2 more

Vetor · 2021

doi:10.14295/vetor.v31i2.13743 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Among several severe plastic deformation (SPD) methods, the Equal Channel Angular Pressing (ECAP) process is one of the most popular. This process's main characteristic is producing materials with ultra-fine or nanometric grains. Due to these microstructural changes, it is possible to improve mechanical properties such as strength and ductility. In this perspective, the aim of the present work was to evaluate the variations of the mechanical hardness property associated with microstructural and textural changes of pure copper as a function of its processing by SPD via ECAP. For this, the material was submitted to four passes through routes A (the sample is repetitively pressed without any rotation between each pass) and Bc (the sample is rotated in the same sense by 90° between each pass) at cold and warm temperatures. Through the obtained result, it was verified that the ambient temperature of the Bc route was the one that promoted greater homogeneity in the microstructure and weakening of the texture after the fourth pass. On the other hand, warm processing of copper by ECAP promoted a softening of the samples and a homogeneous distribution of hardness in both routes.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.