Skip to content
naulon

Not checkedNot checked for notices yet.

Influence of Lubricants Degradation Level over Tribological Properties

Alexandru Valentin RADULESCU, Irina RADULESCU, Florin PETRESCU

INCAS Bulletin · 2022

doi:10.13111/2066-8201.2022.14.1.11 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The paper presents the tribological aspects of the solid-fluid interaction, in order to develop an easy to use fast diagnoses method for the liquid lubricants, with minimal investments and a high precision level. The test program, using a TIMKEN equipment, analyzed the influence of the lubricant state of degradation, considering the tribological behavior of the friction couple during the working time. Two different lubricants (15W-40 and H46-EPS/1) were tested, in both fresh and used state. Tests were performed using three values of the normal load and two sliding velocities. During the tests, the wear trace (width and depth) was measured. Finally, pictures of the damage area were obtained with NEOPHOT 21 metallographic microscope. Spectrometric analysis was performed to identify the geometry, shape and concentration of the wear particles for fresh and used lubricants. The main result of this research is an altenative method of evaluating and quantifying the wear degree and lubricants durability.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.