Skip to content
naulon

Not checkedNot checked for notices yet.

Convenient estimation of elastic, plastic and creep constitutive equations for solder under tensile test of constant strain rate with loading, unloading and reloading paths

Naomi HAMADA, Katsuhiko MOTOIE

Nihon Kikai Gakkai ronbunshu · 2014

doi:10.1299/transjsme.2014smm0147 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The deformation of solder shows the unique characteristics which differs from one of other engineering materials remarkably, as it is accompanied with the large creep deformation at room temperature. This deformation behaviour appears in a typical stress-strain relationship in loading, unloading and reloading path. In the present study, the tensile test of Sn-37Pb solder subjected to loading, unloading and reloading under a constant strain rate was carried out at room temperature. The constitutive equations of elasticity, plasticity and creep of the tested material were independently obtained from the stress-strain relationship under loading or reloading path. A typical stress-strain relationship of Sn-37Pb solder with time-dependent deformation was correctly reproduced by the simulation of the numerical analysis of the Runge-Kutta method and the finite element method using these constitutive equations.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.