Not checkedNot checked for notices yet.
A method for suppressing resonance response of a vibration system coupled by springs
Masashi KOMADA, Yuichi MATSUMURA, Ichiro KIDO and 1 more
Nihon Kikai Gakkai ronbunshu · 2019
doi:10.1299/transjsme.19-00171 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Since interior noise of an electric vehicle driven by motor has no engine noise, the contribution of the road induced noise at the low-middle vehicle speed range is higher and the noise is more noticeable for passengers compared to a conventional internal combustion engine vehicle. For this background, to reduce the road induced noise, this paper proposes a new method for suppressing the resonance response of the two vibration systems coupled by springs, which simulate a car body assuming the use of semi-active stiffness control. When the compliance matrix at coupling degrees of freedom is decomposed into eigenvalues and eigenvectors, it is known that resonance responses of a whole structure depend on the product of the eigenvector corresponding to zero eigenvalue and the compliance matrices of subsystems. Therefore, we proposed a method to suppress resonance response by setting the product to a zero vector. Firstly, an eigenvector is specified to achieve the zero vector. Then, to realize the specified eigenvector, the coupling stiffness between two subsystems, which is used in semi-active control, is changed. Finally, we apply this method to a beam structure and verify its effectiveness.
Abstract licence: CC BY-NC-ND
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.