Skip to content
naulon

Not checkedNot checked for notices yet.

Application of three-node triangular element with drilling and strain degrees of freedoms to rigid plastic finite element method and verification of its validity

Yasuyuki KANDA

Nihon Kikai Gakkai ronbunshu · 2019

doi:10.1299/transjsme.19-00035 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The rigid plastic finite element method (RPFEM) is used in many re-meshing procedures in material processing analysis. Currently, the four-node quadrilateral element, which can avoid volumetric locking, is applied in the RPFEM. However, it is desirable to apply the three-node triangular element instead because of its easy and robust mesh generation procedure. This study applied the three-node triangular element with drilling and strain degrees of freedoms (GNTri3) to the RPFEM, the validity of which was verified by analyzing some numerical examples. First, as verification for the volumetric locking characteristic of the GNTri3, FEM analysis of a nearly incompressible elastic body under plane strain conditions was performed. Volumetric locking was recognized by applying full integration to the element stiffness matrix of the GNTri3. Therefore, it was revealed that the RPFEM using the GNTri3 is necessary for applying selective reduced integration to the element stiffness matrix. Analysis of the RPFEM using the GNTri3 showed that the tool pressure was in good agreement with theoretical solutions and FEM results obtained using a conventional four-node quadrilateral element at a rigid punch indentation. In addition, reasonable material processing deformations were computed in the plane strain compression test.Therefore, validity of the RPFEM using the GNTri3 was verified by numerical results.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.