Not checkedNot checked for notices yet.
Design study of body structure consist of standardized components as module (Realizing and evaluation of body frame structure made of CFRP)
Yasuo ASAGA, Hideki SUGIURA, Hidekazu NISHIGAKI and 4 more
Nihon Kikai Gakkai ronbunshu · 2018
doi:10.1299/transjsme.18-00190 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
We have constructed a design method for body structures consist of standardized components which connects pipes, spacers and joints in a previous study. As a practical application example, we have designed detailed shape of spacers and joints of rear frame. In order to evaluate stiffness and displacement under four experiments such as torsion and bending, we have constructed the three-dimensional CAE models. In the CAE models, we have assumed the CFRP's Young's modulus was low considering the manufacturing process. Furthermore, we have made it possible to simulate adhesive behavior by simple modeling instead of adopting the adhesive model called CZM (Cohesive Zone Model) with high model creation cost. As a result, in the initial CAE model, mean square error of displacement at the representative points was from 18.4% to 35.4%. In the improved CAE model, we obtained a model that allows the displacement error to be within 8%.
Abstract licence: CC BY-NC-ND
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.