Skip to content
naulon

Not checkedNot checked for notices yet.

Modeling of mechanical properties at high temperature and creep fatigue analysis for niobium alloy based on damage mechanics

Tadashi MASUOKA, Yutaka TOI, Hideshi KAGAWA and 1 more

Nihon Kikai Gakkai ronbunshu · 2015

doi:10.1299/transjsme.15-00243 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The elasto-plastic constitutive equation based on the concept of continuum damage mechanics was formulated for the niobium alloy (C103) which is used as a chamber material in a satellite's thruster. The existing theory was extended to deal with the creep fatigue behavior at the high temperature of 1500°C. Creep, tensile and creep fatigue tests (stress-controlled) were conducted with plate bar specimens made of the niobium alloy. The tests were conducted at 1500°C and obtained data were used to determine the material parameters employed in the constitutive equation. Time-strain curves and damage-evolution curves were also simulated and the validity of material parameters was confirmed by comparing calculated values with test results. Creep fatigue life analyses were also conducted and the results were compared with the experimental values. From the results, it is expected that the used constitutive equations and determined material parameters can predict the mechanical features and creep fatigue life for the niobium alloy at the high temperature.

Abstract licence: CC BY-NC-ND

References16

    16 more references, whose wording the paper’s licence keeps private.

    Reads

    Read by people on this page

    None yet.

    Checked or read by AI through naulon

    None yet.

    A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

    Are you an author?

    Is this your paper?

    Claim it to add your note and be paid when agents cite it. Free.