Skip to content
naulon

Not checkedNot checked for notices yet.

Jet breakup behavior with surface solidification

Yuzuru IWASAWA, Yutaka ABE, Eiji MATSUO and 1 more

Nihon Kikai Gakkai ronbunshu · 2015

doi:10.1299/transjsme.14-00460 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

For the safety design of a Sodium-cooled Fast Reactor, it is strongly required that the molten material which is released from a core region has to be solidified and cooled down in a reactor vessel by breaking up in the sodium coolant during a Core Disruptive Accident in terms of Post Accident Heat Removal. In this paper, in order to investigate the effects of the surface solidification on the jet breakup, the experimental results using a low melting point alloy and water are reported. The jet breakup behavior is observed with a high speed video camera, the front position of the jet and the jet breakup length are estimated with the visual observation results. In the high injection velocity conditions, it is found that the jet breakup is dominated by fragmentation induced by the surface instability due to the relative velocity even in the surface solidification condition. In addition, it is also found that the tendency of the jet breakup length is close to Epstein's correlation.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.