Not checkedNot checked for notices yet.
A study on stabilization of operation time for hydraulic operating circuit breaker (Development of hydraulic stabilization system holding constant high pressure)
Tohru YAMASHITA, Tsutomu SUGIYAMA, Yoshiki HIRANO and 2 more
Nihon Kikai Gakkai ronbunshu · 2015
doi:10.1299/transjsme.14-00402 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
A hydraulic operation stabilizing system was developed for a hydraulic operating mechanism of a gas circuit breaker (GCB). Air bubbles and cavities, created in hydraulic fluid by the movement of the operating mechanism, have an effect on the movement of valves and pistons within the operating mechanism. The hydraulic operation stabilizing system consists of a hydraulic circuit and a latch system. The purpose of the hydraulic circuit is to limit the change in pressure during the initial operating time of the open and close operation, and to keep the pressure high after the operation has been completed. The latching system is used to control the movement of the main piston. The stabilizing system also detects the piston position at its open end, and the control valves through a simple hydraulic circuit and not by electrical means. An experimental hydraulic mechanism with an operation stabilizing system was built, and stable operations were confirmed.
Abstract licence: CC BY-NC-ND
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.