Not checkedNot checked for notices yet.
Raman characterization of the simulated control blade debris to understand the boric compounds transformations during severe accidents
Anton PSHENICHNIKOV, Yuji NAGAE, Masaki KURATA
Mechanical Engineering Journal · 2020
doi:10.1299/mej.19-00477 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
In order to address the challenge of the future Fukushima Dai-Ichi Nuclear Power Station (1F) debris characterization a new Raman spectroscopy investigation of simulated debris obtained after two control blade degradation tests CLADS-MADE-01 and CLADS-MADE-02 has been performed. A mechanism of the B4C degradation during the beginning phase of a severe accident until approximately 1873 K is described. A sequence of material interactions of B4C with stainless steel resulted in partial transformation of B4C granules into pure graphite, that later experienced oxidation with formation of COx gas. Especially this mechanism is active during melting phase in oxidative environment. At the same time boron was associated with formation of new Cr-B-containing solid phases in liquid melt, that continued relocation depleted by Cr and B, which resulted in redistribution of elements within the degrading reactor core. This knowledge would provide new insights for understanding of the absorber blade degradation mechanism under specific accident conditions close to Fukushima Daiichi Unit 2 and Unit 3 reactors and especially would be helpful during potential characterization of metallic debris of 1F.
Abstract licence: CC BY-NC-ND
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.