Magnetic and magnetostrictive properties in heat-treated Fe-Co wire for smart material/ device
Takahiro YAMAZAKI, Takahisa YAMAMOTO, Yasubumi FURUYA and 1 more
Mechanical Engineering Journal · 2018
doi:10.1299/mej.17-00569 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The use of inverse magnetostriction effect is a possible approach for the applications of actuator, sensor and energy harvester. A strong textured Fe100-xCox (x = 70 mol%) magnetostrictive alloys have been studies as a new smart material. The design of microstructure plays important roles in performance enhancement of power generation by heat-treatment at several temperatures from 420℃ to 850℃. Experimentally, the effect of heat-treatment on their microstructures was evaluated by laser microscope and X-ray diffraction and orientation analysis. Furthermore, the magnetic, magnetostrictive and electric power generation characteristics were investigated by vibrating sample magnetometer (VSM), single-axis strain gauge and drop impact test, respectively. These results indicated the lattice strain in the crystal grain was related to the coercivity resulting from the domain wall mobility in the materials. Moreover, the orientation aligned by the drawing process was related to the magnetostriction. Also, the large grain width, that is, low grain boundary density was strongly attributed to enhance the magnetostrictive susceptibility. The output power calculated from the output waveform was reached up to 91 mJ/s for 820℃-WQ (water quenching) resulting from the high magnetostrictive susceptibility as well as the quenching effect from the temperature near the (bcc + fcc)/bcc interface. These results indicated that it is important to control not only the annealing conditions for improving magnetostrictive susceptibility but also the control of residual stress or grain boundary density for developing higher performance of output characteristics.
Abstract licence: CC BY-NC-ND
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.