Skip to content
naulon

Not checkedNot checked for notices yet.

Measurement of strain distribution in metals for tensile test using digital image correlation method and consideration of stress-strain relation

Akira KATO

Mechanical Engineering Journal · 2016

doi:10.1299/mej.16-00141 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Displacement distribution in plate specimen of aluminum during tensile test was measured with digital image correlation method and strain distribution was derived based on the displacement distribution. Change of strain distribution was obtained during whole tensile test. Local concentrated strain starts to appear before proof stress and the local strain becomes larger as the deformation proceeds and strain at other area in the specimen almost does not change. In consideration of stress-strain relation, true stress derived from the conventional average stress in uniform area of the specimen decreases after proof stress with increase of true strain. True stress derived from the maximum strain in specimen increases with increase of true strain and it is found that work hardening exists. Stress-strain relation for aluminum was compared with the result for steel which the author already published. It was found that we have to measure strain distribution and consider local maximum strain to evaluate stress-strain relation accurately.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.