Not checkedNot checked for notices yet.
Effects of heating history on sintering properties of nickel powder compacts
Kazunari SHINAGAWA, Sho UTSUNOMIYA
Mechanical Engineering Journal · 2015
doi:10.1299/mej.15-00259 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The effects of heating history on the sinterability of nickel powder compacts as a model material are examined from a view point of driving force and flow resistance, that is, the sintering stress and viscosity. Sinter-compression tests were conducted at different constant temperatures for cylindrical specimens, which underwent one-step or two-step heating. In the two-step heating, the specimens were heated up to a higher temperature and cooled down to the test temperatures. After the tests, the microstructure of each specimen was examined and compared with the change in sintering stress and viscosity. For the whole range of test temperatures, viscosity was increased by the two-step heating, which can be explained by the effects of time-hardening. On the other hand, for the lower range of test temperatures, the sintering stress was decreased by the two-step heating. This may be a result of the formation of large pores due to inhomogeneous shrinkage in the unstable state of the powder with small contact in the initial stage of sintering.
Abstract licence: CC BY-NC-ND
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.