Not checkedNot checked for notices yet.
Effect of ultrasonic vibration on stress relaxation in micro-compression test with step motion
Ryo YAMAGUCHI, Yang BAI, Tetsuhide SHIMIZU and 1 more
Mechanical Engineering Journal · 2015
doi:10.1299/mej.14-00410 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
In this study, to promote stress relaxation effect by the servo actuated step motion that stops the die motion at regular interval, a novel microforming process with combining ultrasonic vibration and the step motion was proposed. To investigate the effect of ultrasonic vibration on stress relaxation by step motion, a micro-compression test was carried out in different scale dimension with the specimen size of 0.5, 1.0 and 2.0mm in diameter and height. Stress relaxation by step motion was repeated for 6 times at constant strain interval. Ultrasonic vibration with amplitude of 1.2 and 2.4 μm was applied on the axial direction during the stress relaxation by step motion. As results, in the all process conditions, the stress drop increased with decreasing the specimen size. To investigate the size dependency of the effect of ultrasonic vibration on stress relaxation, the stress drop in the surface and inner grains was calculated based on the surface grain theory. The result showed that the stress drop in the surface grains was larger than that in the inner grains in similar scale dimension. Additionally, the stress drop in the surface grains increased with decreasing the specimen size. The possibility of improving the material formability by this process was experimentally demonstrated.
Abstract licence: CC BY-NC-ND
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.