Performance Analysis of Frostless Heat Exchanger by Spreading Antifreeze Solution on Heat Exchanger Surface
Young-Soo CHANG
Journal of Thermal Science and Technology · 2011
doi:10.1299/jtst.6.123 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The effect of antifreeze solution liquid film on the frost prevention is experimentally investigated. It is desirable that the antifreeze solution spreads widely on the heat exchanger surface forming thin liquid film to prevent frost nucleation while having small thermal resistance across the film. A porous layer coating technique is adopted to improve the wettability of the antifreeze solution on heat exchanger surface. The antifreeze solution spreads widely on the heat exchanger surface with 100 µm thickness by the capillary force resulted from the porous structure. It is observed that the antifreeze solution liquid film prevents a heat exchanger from frosting. The reductions of heat and mass transfer rate caused by the thin liquid film are only 1-2% compared with those for non-liquid film surface.
Abstract licence: CC BY-NC-ND
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.