Skip to content
naulon

Not checkedNot checked for notices yet.

Shape optimization of a bended film-cooling hole to enhance cooling effectiveness

Jun-Hee KIM, Kwang-Yong KIM

Journal of Thermal Science and Technology · 2019

doi:10.1299/jtst.2019jtst0011 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

To improve cooling effectiveness of film-cooling hole, bending of hole was investigated and optimized using surrogate modelling based on three-dimensional Reynolds-averaged Navier-Stokes analysis. The turbulence was modeled using a shear stress transport model. The spatially-averaged film-cooling effectiveness was employed as the objective function, and the injection angles of the lower and upper cylindrical parts and height of the bending point were selected as design variables for optimization. The Kriging model was used to approximate the objective function. 27 design points were selected by the Latin hypercube sampling, where objective function values were calculated to construct the surrogate models. The results at a blowing ratio of 0.5 showed that the optimum bended film-cooling hole improved the spatially-averaged film-cooling effectiveness by 39.9 % and 78.0 % compared to a reference bended hole and a cylindrical hole, respectively.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.