Not checkedNot checked for notices yet.
Rupture of an air bubble on the solid surfaces
Shingo ISHIHARA, Yoshiyuki TAGAWA, Masaharu KAMEDA
Journal of Fluid Science and Technology · 2018
doi:10.1299/jfst.2018jfst0015 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
We investigate behavior of bouncing and rupturing air bubbles on solid surfaces experimentally. We focus our attention to how the hydrophilicity of the solid surface alters the rupture process. We observe motion of the single bubble of a fixed diameter on several flat glass plates using high-speed cameras. In this experiment, we use two kinds of plate whose contact angles are different from each other. The bubble rises and bounces on the glass surface several times without touching the plate. It is found that, on the weakly hydrophilic glass plate whose contact angle is 65 degree, the liquid film between the bubble and the solid surface ruptures within about a hundred milliseconds after bouncing. The rupture starts at a single site. In contrast, on a highly hydrophilic glass whose contact angle is 7.6 degree, rupture time becomes much longer, i.e. more than 30 minutes. The rupture starts at several sites simultaneously. Note that in the both cases bounce times, bounce intervals, and bounce distance, are quite similar. Quite large difference in onset of rupture indicates that the existence of surface nanobubbles on the weakly hydrophilic glass enhances the rupture of liquid film. In the case of highly hydrophilic glass, the penetration of air into the liquid film after the rupture exhibits the pattern similar to viscous fingering.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.