Skip to content
naulon

Not checkedNot checked for notices yet.

Aspect ratio and end wall effects on the surface pressure coefficient of a circular cylinder

Ayumu INAGAKI, Yuki MINO, Mitsuo IWAMOTO and 1 more

Journal of Fluid Science and Technology · 2014

doi:10.1299/jfst.2014jfst0062 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The effects of end wall conditions and aspect ratios on the surface pressure and the local drag coefficients of a circular cylinder were examined experimentally at a blockage ratio of 3.0% and a Reynolds number of 8000. Both end walls supporting the cylinder were flat plates with different tip conditions on which transitional boundary layers were formed. The ratio of the boundary layer thickness to cylinder diameter at the cylinder position was 0.60 and 0.83, and the aspect ratio was varied from 8 to 32. Regarding the thick wall boundary layer, the base pressure coefficient along the cylinder axis was mostly constant for all aspect ratios, with the exclusion of the end wall vicinity, but rapidly rose as the aspect ratio decreased. In the case of the thin wall boundary layer, the base pressure coefficient was very little constant along the cylinder axis, but the difference for various aspect ratios was relatively small. The local pressure drag coefficient at the mid-span increased in the case of the high aspect ratio and the thin boundary layer.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.