Visualization of Stress Distribution on Ultrasonic Vibration Aided Drilling Process
Hiromi ISOBE, Yusuke UEHARA, Manabu OKADA and 2 more
Journal of Advanced Mechanical Design, Systems, and Manufacturing · 2012
doi:10.1299/jamdsm.6.771 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The ultrasonically assisted machining is suitable to achieve sub-millimeter drilling on difficult-to-cut materials such as ceramics, hardened steel, glass and heat-resistant steel. However, it is difficult to observe the high-frequency and micron-scale phenomenon of ultrasonic cutting. In this report, high speed camera based on photoelastic analysis realized the visualization of stress distribution on drilling process. For the conventional drilling, the stress distribution diagram showed the intensive stress occurred under the chisel because the chisel edge of drill produces large plastic deformation. On the other hand, the ultrasonic drilling produced spread stress distribution and stress boundary far away from the chisel. Furthermore, chipping or cracking of inner wall of silica glass was influenced considerably by cutting fluid.
Abstract licence: CC BY-NC-ND
References7
7 more references, whose wording the paper’s licence keeps private.
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.