Skip to content
naulon
Not checkedNot checked for notices yet.

Optimization of Segmented Blank Holder Shape and Its Variable Blank Holder Gap in Deep-Drawing Process

Jirasak SRIRAT, Koetsu YAMAZAKI, Satoshi KITAYAMA

Journal of Advanced Mechanical Design, Systems, and Manufacturing · 2012

doi:10.1299/jamdsm.6.420 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Optimum segmented blank holder shape and its variable blank holder gaps (VBHGs) are determined by a sequential approximate optimization (SAO) with radial basis function network. In deep drawing, wrinkling and tearing of blank sheet are major defects. The optimum segmented blank holder shape and its VBHGs are determined to avoid these defects. The Forming Limit Diagram (FLD) is employed to evaluate quantitatively the wrinkling and the tearing. In the numerical examples, a square cup deep drawing is handled. The objective is to minimize the thickness deviation after sheet forming. The wrinkling and the tearing are separately evaluated as the constraints. The dimensions of the segmented blank holder shape and the BHGs are taken as the design variables. The optimization result shows that simultaneous optimization of both the segmented blank holder shape and the VBHGs is one of the effective approaches for improving product quality.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.