Heat Flux Estimation at Heat Sources of Machine Tools by Solving Inverse Problems
Kazutake UEHARA, Fumio OBATA
Journal of Advanced Mechanical Design, Systems, and Manufacturing · 2010
doi:10.1299/jamdsm.4.849 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
An increase in frictional heat due to the increase in rotational speed and feed rate causes thermal deformation of machine tools, resulting in a decrease in machining accuracy. To establish a method for reducing thermally induced machining errors of machine tools, a method has been proposed to estimate the heat flux acting upon a machine tool body by solving inverse problems. Experiments were carried out with the cross slide of a machine tool. Using the heat flux estimated at the heat source, the temperature rise of the body in a steady state could be obtained with sufficient accuracy. Effects of both the number of evaluating and measuring points of the temperature on the estimation accuracy were also examined experimentally. More accurate estimation of the heat flux requires that the number and position of both temperature measurement points and candidates for heat sources are selected considering how the machine tool is actually operated.
Abstract licence: CC BY-NC-ND
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.