Skip to content
naulon
Not checkedNot checked for notices yet.

Chatter Stability in Turning and Milling with in Process Identified Process Damping

Yusuke KURATA, S. Doruk MERDOL, Yusuf ALTINTAS and 2 more

Journal of Advanced Mechanical Design, Systems, and Manufacturing · 2010

doi:10.1299/jamdsm.4.1107 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Process damping in metal cutting is caused by the contact between the flank face of the cutting tool and the wavy surface finish, which is known to damp chatter vibrations. An analytical model with process damping has already been developed and verified in earlier research, in which the damping coefficient is considered to be proportional to the ratio of vibration and cutting velocities. This paper presents in process identification of the process damping force coefficient derived from cutting tests. Plunge turning is used to create a continuous reduction in cutting speed as the tool reduces the diameter of a cylindrical workpiece. When chatter stops at a critical cutting speed, the process damping coefficient is estimated by inverse solution of the stability law. It is shown that the stability lobes constructed by the identified process damping coefficient agrees with experiments conducted in both turning and milling.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.