Not checkedNot checked for notices yet.
Cutterhead mud-caking detection method and application based on cutter wear and temperature measurement
Zhiyong JI, Yimin XIA, Hao LAN and 2 more
Journal of Advanced Mechanical Design, Systems, and Manufacturing · 2019
doi:10.1299/jamdsm.2019jamdsm0088 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Mud-caking of the cutterhead in a tunnel boring machine (TBM) has been commonly encountered when a TBM is excavating through strongly weathered rock or clay. Not only the opening of cutterhead could be blocked to cause problem for muck flowing through, mud-caking of a cutterhead will also lead to the increase of thrust and torque, as well as compromise of tunneling efficiency. To predict the mud-caking status in real time, a prediction model was established based on cutter temperature characteristics, and a bus-based detection system was designed to monitor cutter wear and temperature in tunneling. Such prediction model and detection system were verified on an earth pressure balance (EPB) TBM at a Shenzhen metro project. The research demonstrated that the detection system performed its function of monitoring cutter wear and temperature changes in real time. A dynamic prediction of cutterhead mud-caking status was also proved using the prediction model.
Abstract licence: CC BY-NC-ND
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.