Skip to content
naulon

Not checkedNot checked for notices yet.

Influence of additional surface finishing to the material properties and the flank load carrying capacity of case-hardened gears with grinding burn

Johannes KOENIG, Peter KOLLER, Thomas TOBIE and 1 more

Journal of Advanced Mechanical Design, Systems, and Manufacturing · 2017

doi:10.1299/jamdsm.2017jamdsm0075 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The grinding of case-hardened gears after the heat treatment ensures a high quality regarding the gear geometry and tooth surface topography. If the limits of the gear material are exceeded during this process, the mechanical and thermal influence from the grinding operation can lead to tempering effects and re-hardening of the gear teeth. As part of the research project FVA (Forschungsvereinigung Antriebstechnik e.V.) 453 (Schwienbacher et al., 2007), the influence of grinding burn on the flank load carrying capacity has been investigated. As a result, a surface factor has been proposed to allow a consideration of the negative influence on the flank load carrying capacity due to grinding burn. However, for most applications, the flank load carrying capacity of the unimpaired tooth flank must be provided to ensure a safe operation. Within the project FVA 453 II (Koller et al., 2012b), the potential of superfinishing, shot peening and re-grinding, respectively, as a repairing method were evaluated experimentally. The main results of this project will be summarized in this paper.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.