Not checkedNot checked for notices yet.
Flying-height and tracking-position controls with thermal-positioning actuator in hard disk drives
Takenori ATSUMI
Journal of Advanced Mechanical Design, Systems, and Manufacturing · 2017
doi:10.1299/jamdsm.2017jamdsm0027 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
To improve positioning accuracy of a magnetic head in hard disk drives (HDDs), a triple-stage-actuator system was developed with a thermal-positioning actuator for a magnetic-head-positioning system. This positioning system has three types of actuators: a voice coil motor (VCM), piezoelectric (PZT) actuators, and the thermal-positioning actuator. In this system, a magnetic head has a heater located in a horizontal direction of read/write elements as the thermal positioning actuator. By using this structure, the control system can move the position of read/write elements of the magnetic head in a horizontal direction with thermal expansion induced by the heater with an electric current. The thermal-positioning actuator is good for control in high frequency range because it has little adverse effect caused by mechanical resonances. As a result, the triple-stage-actuator system enable us to improve the positioning accuracy during a track-following control from conventional dual-actuator systems. However, the thermal-positioning actuator causes flying-height fluctuations of the magnetic head that may lead to worsening of magnetic recording performances. In HDDs, the magnetic head has another heater located in a vertical direction of read/write elements in order to control flying height of the read/write elements. This control system is called thermal flying-height control system. To compensate for the flying-height fluctuations of the magnetic heads caused by the thermal-positioning actuator, this paper presents a magnetic-head-positioning system that employs a feedforward control scheme on the thermal flying-height control system. Simulation results showed that the proposed method was able to compensate for the flying-height fluctuations during the track-following control by about 90 %.
Abstract licence: CC BY-NC-ND
References33
33 more references, whose wording the paper’s licence keeps private.
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.