Skip to content
naulon

Not checkedNot checked for notices yet.

Optimization of 3-DOF parallel motion devices for low-cost vehicle simulators

Sergio CASAS, Inmaculada COMA, Cristina PORTALÉS and 1 more

Journal of Advanced Mechanical Design, Systems, and Manufacturing · 2017

doi:10.1299/jamdsm.2017jamdsm0023 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Motion generation systems are becoming increasingly important in certain Virtual Reality (VR) applications, such as vehicle simulators. This paper deals with the analysis of the Inverse Kinematics (IK) and the reachable workspace of a three-degrees-of-freedom (3-DOF) parallel manipulator, proposing different transformations and optimizations in order to simplify its use with Motion Cueing Algorithms (MCA) for self-motion generation in VR simulators. The proposed analysis and improvements are performed on a 3-DOF heave-pitch-roll manipulator with rotational motors, commonly used for low-cost motion-based commercial simulators. The analysis has been empirically validated against a real 3-DOF parallel manipulator in our labs using an optical tracking system. The described approach can be applied to any kind of 3-DOF parallel manipulator, or even to 6-DOF parallel manipulators. Moreover, the analysis includes objective measures (safe zones) on the workspace volume that can provide a simple but efficient way of comparing the kinematic capabilities of different kinds of motion platforms for this particular application.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.