Skip to content
naulon
Not checkedNot checked for notices yet.

Fabrication characteristics of a line-and-space pattern and a dot pattern on a roll mold by using electron-beam lithography

Kai OJIMA, Masashi SAITO, Noriyuki UNNO and 1 more

Journal of Advanced Mechanical Design, Systems, and Manufacturing · 2016

doi:10.1299/jamdsm.2016jamdsm0074 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Roll-to-roll nanoimprint lithography (RTR-NIL) has received considerable attention because it permits large-area nanopatterning with both high resolution and high throughput. However, the application of RTR-NIL is restricted by difficulties in fabricating nanoscale roll molds. Seamless roll molds are especially desirable, because the presence of seams reduces the yield of the imprinted product. We have previously developed a technique producing seamless molds by direct writing with an electron beam onto a rotating cylindrical substrate. We have now developed a method for fabricating fine patterns on roll molds for RTR-NIL by using electron-beam lithography (EBL) with a positive-type electron-beam resist and an aluminum roll as a substrate, which is rotated in a scanning electron microscope. The electron beam is focused at a single point on the surface of the roll mold and the dot pattern is produced by switching the beam on and off. Dot and line-and-space patterns are obtained by developing the exposed substrate. In this study, we investigate the fabrication characteristics of a line-and-space pattern and a dot pattern by using EBL with a rotating stage. As a result, we produced fine dot patterns with a diameter of less than 70 nm and a fine line-and-space pattern with a width of less than 70 nm.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.