EFFECT OF REINFORCEMEMT PARTICLES PREHEATING ON MECHANICAL AND MICROSTRUCTURAL PROPERTIES OF AMC
Romeo Sephyrin Fono – Tamo, Jen Tien – Chien
Acta Metallurgica Slovaca · 2018
doi:10.12776/ams.v24i4.1136 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
An investigation into the effect of preheating the powder particles versus not preheating before mixing it with an aluminium slurry was carried out. This was seen as way of overcoming the challenge of wettability which often occurs when powder particles are added to a melted metal for the purpose of developing a metal matrix composite. In this study, non – preheated, 2 w.% preheated and 4 w.% preheated palm kernel shell ash powder was used to develop an aluminium matrix composite (AMC) via stir casting method. Mechanical properties revealed that AMC with 4 w.% pks ash inclusion has the highest Vickers Hardness value. Meanwhile, optical micrographs and scanning electron micrograph show that the pks ash both non – preheated and preheated are homogenously distributed into the matrix. This is further confirmed by the energy dispersive spectroscopy (EDS) mapping of the various samples. Although pks ash particles are only visible on the optical microscope micrographs, the elemental analysis of the various samples through EDS show a strong presence of carbon at various degree proving the presence of pks ash in the composite. Overall, preheating does not significantly affect the surface morphology of the AMCs based on the derived optical and scanning electron micrographs and AMC with higher content of pks ash particles seems to have better mechanical properties.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.