Skip to content
naulon
Not checkedNot checked for notices yet.

INFLUENCE OF TEMPERATURE AND STRAIN RATE ON SUPERPLASTICITY KINETICS OF COMPOSITE AZ61-F MAGNESIUM MATERIALS

Michal Besterci, Song-Jeng Huang, Katarína Sülleiová and 1 more

Acta Metallurgica Slovaca · 2018

doi:10.12776/ams.v24i3.1153 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Micromechanisms of fracture of AZ61-F composites in the zone of quasi-superplastic deformation were analyzed and quantified in this work. Deformation of AZ61-F magnesium alloys with 1 wt.% of Al2O3 phase was tested at a temperature of 473 K and different strain rates. It was shown that at the temperature of 473 K and the highest strain rate applied from 1× 10−2 to 1 × 10−4 s−1, a significant growth of ductility was observed. The mean dimples diameter of the ductile fracture decreased with the decreasing strain rate. The grain size of 0.7 μm was reached by severe plastic deformation using equal channel angular pressing (ECAP). Secondary Mg17Al12 and Al2O3 phases were identified. The maximum strain was reached at the temperature of 473 K and strain rate of 1 × 10−4 s−1.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.